YOUR POSITION: Home > Products > Peristaltic Hose Pump
-
GCP40H-E hose type concrete pump was designed based on the squeeze hose pump. This concrete pump uses high pressure, resisting wear squeeze concrete hose with steel wire reinforcement layers. The electric hose concrete pump also could be used for spraying concrete or refractory materials.
-
Self priming with high suction
Squeeze hose is the only consumption part
Output: 0.01-60m3/h, Pressure: 0.6-3Mpa
Could be used as mortar pump, grout pump, concrete pump etc.
-
Self priming with high suction
Squeeze hose is the only consumption part
Output: 54m3/h, Pressure: 13Bar
Apply for pumping slurry, equiped with filter press machine
-
Self priming with high suction
Squeeze hose is the only consumption part
Output: 40m3/h, Pressure: 7.5Bar
Apply for pumping foam concrete, cellula lightweight concrete
-
Self priming with high suction
Squeeze hose is the only consumption part
Output: 240L/min, Pressure: 10Bar
Apply in TBM for pumping bentonite
-
Self priming with high suction,resistant to oils
Squeeze hose is the only consumption part
Output: 300L/min, Pressure: 15Bar
Apply in shale gas project for pumping oil sludge and slurries
-
Self priming with high suction
Squeeze hose is the only consumption part
Output: 20m3/h, Pressure: 10Bar
Apply in TBM for pumping bentonite
-
Self priming with high suction
Squeeze hose is the only consumption part
Output: 14m3/h, Pressure: 25Bar
pply for grouting cement, mortar, concrete