Colloidal grout mixer for sale is primarily driven by electric motors. The pulp is sucked into the vortex from below and sprayed from the top of the barrel to create a fast flow of liquid, creating a strong vortex inside the barrel that completely and evenly stirs the dry powder and water. To achieve lower water adhesive preparation than slurry. Compared to popular colloidal grout mixers on the market, the colloidal grout mixer is characterized by faster pulping rates and more uniform slurry mixing. It is one of the important facilities of a large-scale pulping station.

 

Colloidal grout mixer for sale are mainly used to mix and prepare slurries that need to be strongly mixed in advance, such as cement slurries. It is used in grout equipment for pressure grout construction such as rail and road construction, mining, hydropower engineering, insulation, waterproofing, grout of building foundations.

 

Benefits of colloidal grout mixer for sale :

1. Highly efficient and large reserves that can be applied to various grout injection engineering operations.

2. Safe and reliable; the key component motor has a high level of protection.

3. The mixing arm of the storage tank adopts high strength, strong force, deformation-free, pre- denaturation frame structure.

4. High speed centrifugal mixing guarantees uniform mixing and no precipitation occurs.

5. High reliability; the motor is installed vertically, easy to seal, the sealing effect is high, the failure rate is low, and if there is a small amount of slurry leak in the stirring shaft of the motor, it will affect the production and use in a relatively short period of time. I will not give it.

 

Precautions for using colloidal grout mixer for sale :

1. Make sure the mixing impeller is steered correctly so that the slurry pipe does not leak.

2. Add an appropriate amount of water, turn on the device to clean and moisten the pulping barrel and pipeline, and after cleaning, drain the water to the pulping machine.

 

3. Add a certain amount of water to the machine. (Close the main valve on the front of the hopper before starting the machine to stop adding water to the bucket, but do not turn off the main water supply. It can be adjusted properly. Cooling the transmission And cleaning should be done. The unit during pulping, otherwise the drive assembly will burn) Turn on the pulper, add the powder material evenly in the specified order and control the supply time To do. Continue stirring for 3-5 minutes after all powder material has been added.

4. Transport the prepared slurry to the slurry storage tank to maintain dynamic slurry storage.

5. As soon as pulping is complete, clean the equipment and pipeline, turn on the pulper and circulate and remove the cement slurry remaining in the pulper and pipeline. 

If you are interested in colloidal grout mixers for sale, please contact us! Email: info@grout-pumps.com

Colloidal grout mixer for sale

本网站由阿里云提供云计算及安全服务 Powered by CloudDream