Jet grout mixing plant equipment machine

Jet grout mixing plant equipment machine is a complete set for combining a beater and grouting pump to work with high efficiency and low consumption, effectively reducing complicated procedures and remote operation. The beater performs high-speed beating production and storage of cement slurries and similar materials, then pumps the slurry directly to the construction junction to complete continuous beating and grouting.

Jet grout mixing plant equipment machine are mainly used in the construction of above and underground projects such as roads, railways, hydropower, buildings, and mines. Quickly mix media such as water, cement, sand, bentonite, fillers, clays, and silicates. After that, we perform grouting and grouting with a plunger grout pump to perform waterproof plugging, tunnel lining, foundation reinforcement, bedrock reinforcement, void filling, etc. This jet grout mixing plant equipment machine has the advantages of a compact structure, high grout pressure, and a wide application range.

Features of jet grout mixing plant equipment machine:

The structure is compact, with a beater, mixer, and grout pump installed at the base.

It has a low-pressure, high-pressure, and step-less speed regulation system.

The jet grout mixing plant equipment machine consists of hydraulic components.

Mixer and beater functions can be switched by squeezing the valve.

The oil temperature gauge can automatically control the cooling fan to work within the normal temperature range. When the temperature is too high, the machine will automatically stop working.

Full hydraulic drive, electric motor, or diesel engine as a power source. Easy to operate and maintain.

Jet grout mixing plant equipment machine must be able to feed, mix, agitate and pump grout and additives to the satisfaction of the technician. It shall be maintained at all times and grout holes lost or damaged due to mechanical failure of equipment or insufficient grout supply shall be replaced with another hole drilled by the Contractor at its own expense. A quantity of grouting equipment is required to perform the work specified here. The types you need to provide should include:

Circulating grout headers with control valves and pressure gauges with protectors are shown. A control valve must be connected to the return line and header. Headers should be connected directly to the hole risers using quick connectors.

Such valves, packers, pressure gauges, pressure hoses, supply lines, and small tools may be required to continuously supply grout at specified and precisely controlled pressures. Pressure hoses and grout supply lines should be at least 1 inch inside diameter. All pressure gauges used for grouting should be checked for accuracy with an accurately calibrated precision gauge. Gauges should be checked at least every 24 hours. If determined by the engineer, it should be checked more frequently. If a defect is found, grouting work is halted until a gauge calibration is obtained.

More details about the grout mixing plant equipment machine , please contact us!