High pressure cement grout pump with mixer and agitator

Gaode Technology is a grout pump with mixer and agitator company with 20 years of production experience, our main products are grout pumps, pulp machines, grout pump stations, etc. The cement grout pump with mixer and agitator sold has been exported to Saudi Arabia, India, Australia, Malaysia and other countries, and has been well received by customers.

The cement grout pump with mixer and agitator consists of an agitator, a mixer and a grout pump. When cement, water, etc. are mixed in the pulping machine, the vortex pulp of the pulping machine quickly creates a uniformly mixed slurry, and the uniformly mixed slurry is stored in the mixing tank and sucked from the tank. Mixing tank for realizing grouting and grouting work.

High pressure cement grout pump with mixer and agitator is characterized by low energy consumption, high efficiency and compact structure. The grout pump pressure can be adjusted during the grouting process, thus reducing unnecessary losses. The grouting method is mainly to inject mud into the rock or soil to increase the bearing capacity of the building area. High pressure cement grout pump with mixer and agitator are used for grouting in mines, tunnels, bridges and other projects to plug leaks, replenish water and increase bearing capacity.

When using the cement grout pump with mixer and agitator, you should pay attention to the following issues:

1. When using the grout pump, you should pay attention to the suction and discharge of the grout pump.If it does not suck, you can check whether it is due to the leakage of the slurry pipe or the leakage of the connection.The grout pump After the operation is finished, clean the grout pump to prevent mud settling and affecting the next use.

2.When mixing the slurry, the pulper should pay attention to the order of feeding.It should be water and cement.The amount of water should be added in a certain amount.Cement should be added slowly Pulper During agitation, there is a phenomenon of non-uniform mixing.

3. Before using the cement grout pump with mixer and agitator, the power must be checked. Long interruptions during grouting, such as sudden interruptions, should be avoided and the equipment should be washed with water. If there is mortar cement left in the pulper, the pulper should be kept running to prevent the cement mortar from settling.