Factory cheap price high pressure grout mixer
Gaode Equipment Co., Ltd. is a leading supplier of factory cheap price high pressure grout mixer in China, a unique supplier in China that has obtained ISO 9001: 2008 and CE certification for the above products, and our products are in the UAE. It is being exported. , USA, Canada, Russia, Malaysia, Pakistan, South Korea, Bahrain, Nepal etc.
Basic maintenance and safety measures for factory cheap price high pressure grout mixer :
1. Before starting the mixing grout, make sure that the moving parts are not clogged by hand and that the connections are fixed everywhere. Then you can turn on the mixing grout and let it idle. Watch for other anomalies in the device while driving, and pay particular attention to the need for the motor to rotate clockwise when viewed from the connection shaft of the transmission assembly.
2. When the reversing handle is turned vertically downward, the pulping position is on the right side and the pulp discharge position is on the right side. If the valve body is severely worn, deformed or rusted (if the valve body cannot be transposed due to severe rust, wipe it with an emery cloth and put it in butter), replace it if the sealing is seriously affected. is needed.
3. Avoid prolonged idle operation of the circulation pump and keep large hard particles and easy-to-roll ribbons out of the circulation pump.
4. Regularly check the transmission assembly of the stirrer for serious slurry leaks or the discharged coolant for extreme turbidity and replace accessories in time depending on the degree of wear. ..
5. Regularly adjust the airtightness of the mixed grout packing seal using cement for sale. It is recommended to drip a small amount of water from the packaging box. Excessive compression affects the service life of the packing and the efficiency of the equipment.
6. When cleaning the factory cheap price high pressure grout mixer , the valves at the bottom of the pulping barrel and the bottom of the circulation pump should be opened to completely drain the residual cement slurry so that hardening does not affect the efficiency of the equipment.
Safe use of the factory cheap price high pressure grout mixer :
1. Set the grout and cement mixture in a flat position and place wood mats in front of and behind the wheel axle so that the tires are overhead and do not move at start-up.
2. Mixing grout and cement should implement secondary leak protection before starting work after the power is connected. You need to check carefully. At the time of test run, it is necessary to confirm whether the rotation speed of the mixing drum is appropriate. In general, the empty speed is 23 revolutions faster than the truck speed (after loading). If there is a big difference, you need to adjust the ratio of the movable wheels to the drive wheels.
3. The direction of rotation of the factory cheap price high pressure grout mixer must match the direction indicated by the arrow. If not, you will need to modify the motor wiring.
If you have any questions, please feel free to contact us.
