Bentonite mixer machine Pakistan

Bentonite mixer machine Pakistan are primarily driven by electric motors. The pulp is sucked into the vortex from below and sprayed from the top of the barrel to create a fast flow of liquid, creating a strong vortex inside the barrel that completely and evenly stirs the dry powder and water. To achieve lower water adhesive preparation than slurries. Compared to popular bentonite mixer machine on the market, bentonite mixer machine Pakistan are characterized by faster pulping rates and more uniform slurry mixing. This is one of the key equipment in a large pulping station.

The bentonite mixer machine Pakistan are mainly used to mix and prepare slurries that need to be strongly mixed in advance, such as cement slurries. The bentonite mixer machine is used in grout equipment for pressure grout construction such as rail and road construction, mining, hydropower engineering, insulation, waterproofing, grout of building foundations.

Benefits of bentonite mixer machine Pakistan:

1. Highly efficient and large reserves that can be applied to various grout injection engineering operations.

2. Safe and reliable; the key component motor has a high level of protection.

3. The mixing arm of the storage tank adopts high strength, strong force, deformation-free, pre-denaturation frame structure.

4. High speed centrifugal mixing guarantees uniform mixing and no precipitation occurs.

5. High reliability; the motor is installed vertically, easy to seal, the sealing effect is high, the failure rate is low, and if there is a small amount of slurry leakage in the stirring shaft of the motor, it will affect the production and use in a relatively short period of time. I will not give it.

Precautions for using bentonite mixer machine Pakistan:

1. Make sure the steering of the mixing impeller is correct so that the slurry pipe does not leak.

2. Add an appropriate amount of water, turn on the equipment to clean and moisten the pulping barrel and pipeline, and after cleaning, drain the water to the pulping machine.

3. Add a certain amount of water to the machine. (Close the main valve on the front of the hopper before starting the machine to stop adding water to the bucket, but do not turn off the main water supply. It can be adjusted properly. Cooling the transmission And cleaning must be done. The unit during pulping, otherwise the drive assembly burns out) Turn on the pulper, add the powder material evenly in the specified order, control the supply time After all the powder material is added, continue stirring for 3-5 minutes.

4. Transport the prepared slurry to the slurry storage tank to maintain dynamic slurry storage.

5. Clean the equipment and pipeline as soon as pulping is complete and turn on the pulping machine to allow the cement slurry remaining in the pulping machine and pipeline to circulate and be removed.

If you are interested in bentonite mixer machine Pakistan, please contact us!We can also provide customized services