Electric grout mixer and pump

The electric grout mixer and pump is a complete set of equipment that combines the mud machine and the cement slurry pump. It can perform high-efficiency and low-consumption tasks, and effectively reduce complex procedures and long-distance operations. The pulping machine can perform high-speed pulping and material storage, such as cement slurry, and pump the slurry directly to the construction connection point to complete uninterrupted grouting and grouting. The electric grout mixer and pump is mainly used in roads, railways, hydroelectric power generation, construction, mines and other above and underground projects. Quickly mix water, cement, sand, bentonite, filler, clay, silicate and other media. Then the plunger grouting pump is used for grouting/grouting to provide waterproof plugging, tunnel lining, foundation and bedrock reinforcement and gap filling functions. This series of grouting pumps have the advantages of compact structure, high grouting pressure and wide application range.

The electric grout mixer and pump can be used in the following applications:

Civil engineering-soil nails, kickbacks, ground anchors, high pressure magma

Building structure repair, foundation reinforcement, foundation reinforcement, soil compaction and grouting

Tension after construction, ceiling under the slab, top and height of the slab

Ocean-Underwater Foundation, Pier, Breaker, Shoreline Foundation

Mining-high pressure locking grouting, tunnel lining, contact grouting, waterproofing, cables, locking bolts

Public utilities-environmental protection structure, waterproofing, dam foundation

Surface engineering-deep well casing, monitoring well, closure and abandonment

Precautions when using the electric grout mixer and pump:

1. When the electric grout mixer and pump is put into operation, the grouting workers shall not leave their posts without authorization.

2. When operating the equipment, the operator shall not put his hands or other objects in the traveling and protective parts.

3. The operator should check the equipment every day and change the grease on the equipment regularly. After each shift, please make sure that the equipment is working properly and the pipeline is unobstructed.

4. It is strictly forbidden to close the water valve during grouting, so as not to block the equipment and pipeline]

5. The cement slurry pump with agitator must be overhauled and maintained to ensure the normal operation of the electromechanical equipment. After each grouting is completed, all equipment must be overhauled.

6. If the pulping workers are not allowed to enter the material handling storage tank, they will promptly supervise the transportation equipment and load the materials to ensure that the slurry concentration is normal, and the filter of the filter needs to ensure that the outlet is ordinary