Grout pump for sale Australia

Grout pump for sale Australia is the key equipment in the grouting construction. The performance and quality of the cement grout pump play a decisive role in the safety, quality and efficiency of the grouting project. If the choice of grouting pump is blind and arbitrary, it may cost a relatively large price and fail to achieve the expected results, or even cause engineering accidents.

Features of grout pump for sale Australia:

1. Compact structure, light weight, easy operation and low maintenance cost;

2. Counter with digital display: it can be displayed at any time and can accumulate working time;

3. The flow and pressure can be steplessly adjusted;

4. Equipped with emergency unloading valve: unloading can be done immediately in emergency;

5. Under low pressure, the flows of the two pumps converge; under high pressure, only one pump works. Low pressure and large flow, high pressure and low output;

6. With full hydraulic shaft device, stable and reliable operation;

7. Cooling method: water-cooled, air-cooled; suitable for hot and cold areas.

Precautions for using grout pump for sale Australia:

1. Before starting to use the grouting pump for the soil nails of rock bolts, please test the pump with clean water first, observe the operation of the grouting pump, and then perform the grouting operation after normal. The common problem is that the air pipe is connected incorrectly and the grouting pump cannot suck and discharge the mud normally.

2. The connection between the rock bolt grouting cement grouting pump and the air duct should be prepared on the well. If a quick coupling is used for connection, a quick coupling (usually φ25mm) must be welded at the air inlet of the grouting pump. If you use horse teeth for connection, please pay attention to the diameter of the underground air pipe to match the diameter of the inlet of the grouting pump.

3. Before connecting the air pipe, drain the air first, then blow off the water in the air pipe, and then connect the grouting pump to the soil nails of the rock bolts to avoid damage due to the dirty water in the air pipe.