What is cement grout used for?

Cement grout is a method to improve physical and mechanical properties by injecting a specific solidifying grout into rock cracks and pores. The purpose of the grout is to prevent penetration, connect leaks, strengthen and correct building deflection. Cement grout is a homogeneous mixture of water, cement and other materials, and is poured into specific areas to improve the stability and hardness of the ground.

The cement grout mixer is made of the grout mixer tank and the agotator. The 1000 liters cement grout mixer is combined with the mixer and agitator. When we pour water, cement, bentonite and other materials into the mixer, the blades in the mixer will mix these materials evenly, and then store them in 1000L agitator. Then we can get a well-stirred solution. The 1000 liters cement grout mixer usually used in hydraulic, railway, highway, construction, mining and other industries. The electric cement grout mixer has the functions of high pulping efficiency, simple operation, uniform slurry, and short-distance transportation.

When we use the 1000 liters capacity electric cement grout mixer, we need to pay attention to the following matters:

1. When you want to use the machine, check the moving parts before turning on the power to see if they are blocked and if the connection is fixed. During operation. Also pay attention to whether the equipment has other abnormal phenomena

2. Regularly check the gearbox components, and add base grease to them.

3. Check whether the valve body is worn. If the valve body is severely worn, deformed or rusted (if the rust is severe and cannot be disassembled, disassemble the valve body, wipe it with a clean emery cloth, add butter to reduce wear), and if the seal is seriously affected, it must be replaced in time.

4. Avoid running the pump dry for a long time, and prevent larger hard particles and easy-winding tape from entering the circulating pump.

5. Regularly check whether there is mud leakage in the gearbox assembly of the agitator, or whether the discharged coolant is extremely turbid, and replace the parts in time according to the degree of wear.

6. When cleaning the equipment, the valves at the bottom of the pulp bucket and the bottom of the circulating pump must be opened to completely discharge the remaining mud and avoid solidification, which will affect the efficiency