New grout mixer sells well in Philippines

New grout mixer is a special equipment for slurry preparation, which is superior to the rapid grout mixer. Mainly used in hydropower, railway, transportation, construction, mining and other industries, mixing cement and bentonite with water and its additives and quickly making slurry. The machine adopts  eddy current double-force circulation, multiple shearing and pulverizing solid groups. The fluid has high dispersion and mixing, and has the pumping ability. Compared with the general grout mixer and the blade mixer, it has the characteristics of faster pulping speed and more uniform slurry mixing, and is one of the key equipments of large pulping stations.

In August, Philippines customers ordered 4 sets of grout mixers.

Water, cement, additives and mixed slurries that require rapid mixing can be stored in tanks to ensure continuous mixing and specifications are as follows:

Mixer volume: 400L;

Mixing speed: 35 rpm;

Stirring amount: 700L;

The volume of the agitator and agitator should be within one station.

Our LMA400-700 high speed grouting mixer has the perfect structure and function to meet the requirements of our customers.

The grout mixer is simple in structure, easy to use and maintain, and is ideal for cement mixing. So what should we pay attention to in the later maintenance and maintenance of  grout mixer?

First, we cannot stop the injection of cooling water while the equipment is running. The  rotation of the  grout mixer causes mechanical wear during operation, and the high temperature is instantaneous. If the injection of cooling water is stopped rashly, it is easy to cause internal parts of the vulnerable transmission assembly, resulting in seal failure. In severe cases, the drive shaft is stuck and the motor is burnt.

Second, we must do a good job of cleaning the equipment. After the  grout mixer is used, the most important follow-up work is to thoroughly clean the residual cement slurry. If the cement is not completely cleaned up, we are very clear and will quickly cake. If a lot of blocks are condensed in the equipment of the  grout mixer, it will cause equipment failure in the next use. Therefore, after use, the  grout mixer equipment should add butter to the butter hole to improve the inner seal life of the rotating assembly