How do we use and maintain our cement grout pump?

Gaodetec is a professional grouting machine, cement grouting pump and mortar pump manufacturer. Since its establishment, the company has focused on the development of support products. After years of development, Gaodetec has developed a cement grouting technology that is leading in the industry. The pump, the cement grouting pump is widely used in various grouting occasions, and is the most ideal and practical cement grouting pump at home and abroad.

The cement grouting pump developed by Gaodetec is divided into two working modes: piston and screw. It can press the evenly mixed cement slurry into the prestressed tensioned hole to achieve the purpose of bonding and anticorrosion. Cement grouting pump The motor drives the reducer and drives the piston or plunger to reciprocate, generating a pulsating pressure slurry through one-way control. It can also be used for grouting reinforcement support of bridges, culverts, mines, tunnels and deep foundation pits.

So how do we use and maintain our cement grout pump?

1. Before the cement grouting pump starts the equipment, check whether the hydraulic oil level in the tank is normal, and whether the stroke switch is tight. If there is any discrepancy, it should be treated in time;

2. During the operation of the equipment, the operator should always check whether the pressure of the hydraulic system is stable, whether the temperature of the oil is too fast or too high, and whether the air gap is empty or not, and the machine should promptly eliminate the fault. In order to prevent the equipment from malfunctioning, the main oil pump and hydraulic components are damaged. In severe cases, the equipment will not work properly;

3. After the grouting is stopped, the grouting tank and the material flow pipeline should be cleaned in time, and the anti-rust oil should be applied to the inner wall of each material pipeline. If the machine is not useful for a long time, the entire equipment should be fully maintained, keep the equipment intact and drain the hydraulic fluid.

4. The hydraulic oil in the equipment is replaced every 12-18 months to facilitate the stable operation of the system;

5. During the normal use of the equipment, the fasteners and fittings should be tightened once every three months;

6. Periodically remove the filter and air filter once a month to prevent the oil pump from inhaling impurities and damaging the oil pump and hydraulic line.