Jet grouting pump for industrial furnace has been developed in recent years using hydraulics and using advanced foreign technology, low energy consumption, low vibration, low noise, small size, high efficiency, stable and reliable performance, convenient. Jet grouting pump for industrial furnace has the advantages of pressure and flow control, and has a long service life. You can set the maximum pressure for high flow grout pumps. You can avoid unnecessary loss during grouting. Substances with a diameter of less than 8 mm in the slurry can be pumped.


Scope of jet grouting pump for industrial furnace:

1. In construction projects, jet grouting pump are used to transport mortar vertically and horizontally.

2. In the metallurgical steel sector, it is used for repairing blast furnaces and other equipment.

3.The grouting pump for industrial furnace are used for grout injection in defense engineering, civilian air defense engineering, mining and tunnel construction.

4. In the chemical industry, it is used to transport paste-like raw materials (color pastes, paints), magnetic materials and other media.

5. Used to reinforce dams in agricultural land water conservation projects. Sand drilling wells are used to reinforce the walls of the shaft.

6. In railroad construction, it is used to reinforce bridges and culvert grout.


7. Prestressed component engineering is used for mortar injection and swelling.

8. Used to carry fly ash mortar in thermal power plants.

9. In highway pavement maintenance, it is used to inject grout under the indentations of cement concrete pavement slabs.

When selling grouting pump for industrial furnace, you need to be aware of the following:

1. Electrical control boxes, electro-hydraulic valves, and other electrical components should be kept clean and dry and should not be sprayed with water. Always check the wire jackets on the above parts to prevent electric shock and damage.

2. When moving the high flow grout pump at any time, do not hit all parts of the machine freely.

3. When operating a high flow grout pump, the operator must be knowledgeable about grout and familiar with this operating procedure.

4. The slurry is agitated evenly to prevent large particles and foreign matter from entering the slurry suction pipe.

5. The same slurry tank must be fixed and used.

6. When workers pour the bagged material into the grout barrel, it should be equipped with a labor protection device to prevent dust and corrosive materials from harming the body.


As a supplier of  grouting pump for industrial furnace, we can recommend the right grout pump for you. And maybe you can tell me what the pump pressure and flow you need? We also have grout mixers, grout mixing plants and other machines, so if you are interested please contact us! 

Jet grouting pump for industrial furnace

本网站由阿里云提供云计算及安全服务 Powered by CloudDream