Hot sale concrete grout mixer in Africa are primarily driven by electric motors. The pulp is sucked into the vortex from below and sprayed from the top of the barrel to create a fast flow of liquid, creating a strong vortex inside the barrel that completely and evenly stirs the dry powder and water. To achieve lower water adhesive preparation than slurries. Compared to popular colloidal grout mixers on the market, hot sale concrete grout mixer in Africa are characterized by faster pulping rates and more uniform slurry mixing. It is one of the important facilities of a large-scale pulping station.


Hot sale concrete grout mixer in Africa are mainly used to mix and prepare slurries that need to be strongly mixed in advance, such as cement slurries. It is used in grout equipment for pressure grout construction such as rail and road construction, mining, hydropower engineering, insulation, waterproofing, grout of building foundations.


Benefits of hot sale concrete grout mixer in Africa:

1. Highly efficient and large reserves that can be applied to various grout injection engineering operations.

2. Safe and reliable; the key component motor has a high level of protection.

3. The mixing arm of the storage tank adopts high strength, strong force, no deformation, pre-denaturation frame structure.

4. High speed centrifugal mixing guarantees uniform mixing and no precipitation occurs.

5. High reliability; the motor is installed vertically, easy to seal, the sealing effect is high, the failure rate is low, and if there is a small amount of slurry leakage in the stirring shaft of the motor, it will affect the production and use in a relatively short period of time. I will not give it.


Precautions for using hot sale concrete grout mixer in Africa:

1. Make sure the steering of the mixing impeller is correct so that the slurry pipe does not leak.

2. Add an appropriate amount of water, turn on the equipment to clean and moisten the pulping barrel and pipeline, and after cleaning, drain the water to the pulping machine.


3. Add a certain amount of water to the machine. (Close the main valve on the front of the hopper before starting the machine to stop adding water to the bucket, but do not turn off the main water supply. It can be adjusted properly. Cooling the transmission (The unit being pulped, otherwise the drive assembly will burn) Turn on the pulper, add the powder material evenly in the specified order, and control the supply time. To do. Continue stirring for 3-5 minutes after all powder material has been added.

4. Transport the prepared slurry to the slurry storage tank to maintain dynamic slurry storage.

5. Clean the equipment and pipeline as soon as pulping is complete and turn on the pulping machine to allow the cement slurry remaining in the pulping machine and pipeline to circulate and be removed.

If you are interested in hot sale concrete grout mixer in Africa, please contact us!  We can also provide customized services.

Hot sale concrete grout mixer in Africa

本网站由阿里云提供云计算及安全服务 Powered by CloudDream